Gypsum Starting Plaster SGS is designed for levelling surfaces and filling larger imperfections in mineral substrates before applying gypsum finishing compounds or acrylic fillers. It is suitable for interior use in areas not exposed to permanent moisture.

The product is classified as a thin-layer gypsum plaster, type B2/20/2. It can be applied to a range of mineral substrates, including cement, cement-lime and gypsum plasters, concrete, aerated concrete and similar surfaces.

 Key Features

•  Ideal as a base and levelling layer
•  Easy to apply and work with 
•  Suitable for application thicknesses from 2 mm to 10 mm
•  For interior use
•  High compressive strength

 Recommendations

 The temperature during application and drying should be between +5°C and +30°C, with an optimal application temperature of approximately +20°C.Clean tools with water immediately after finishing the work. Remove any product residue or splashes before they dry.