This set includes:

• Foil of colour 12m
•  Adhesive 1L x2

What else you will need? (Bought Separately)

• Primer Hologram
• Hologram Black Mass
• Hologram Protector  

 Jeger Hologram is a decorative effect that will bring a subtle aura of luxury to your interior, while adding a distinctive touch. Thanks to the use of metalizing foil, you will get an amazing wall decoration with a dazzling effect: gold, silver, copper or bronze. The unevenly colored texture with a three-dimensional appearance attracts the eye and gives the wall a unique depth and shine. Jeger Hologram perfectly harmonizes with various interior styles. It will add elegance to modern arrangements, bring a subtle glow to industrial spaces, and give classic rooms a modern twist. It's a versatile solution that will fit your unique style!

How to do the effect ?

1. On a clean, dry, dust-free and degreased wall, apply with a microfiber roller Jeger Primer Hologram Black (according to the instructions on the package). Leave to dry for about 4 hours.

2.Jeger Hologram Black mix thoroughly. Do not dilute, the product is ready to use. Do not mix with other products. Using a trowel, apply a layer to the thickness of the grain (about 1 mm). Apply the product in stages, do not apply to the entire surface at once.

1.    3. In the semi dry  mass, make vertical lines with a brush trowel . Then gently smooth the surface with an ordinary trowel. Apply at a temperature of +8°C to +25°C, at a relative humidity of max. 82%, avoid drafts. Allow to dry for about 12 hours.

1.   4.On the dried surface, using a small roller, apply glue generously (in vertical motions) under one strip of film (preferably at about 25 cm). Glue and foil can be found at: Jeger Hologram Colour Set (metallic foil + adhesive).

1.   5. On the damp adhesive surface, apply one strip of film to the full height of the wall and press gently. Note: apply the film with the matte side to the adhesive. Then, in a similar manner, apply more strips of film, so that each overlaps the previous one, about 1-2 cm wide. Leave it to dry. After about 4 hours, in a steady motion, peel off all subsequent strips of film from top to bottom, starting from the last one

1.   6. Apply to the entire decorated surface Jeger Protector Hologram.

5

4